As a tough PLA, PRO1 is excellent for use in tools, jigs and fixtures.
The high-speed engineering thermoplastic that prints as easy as PLA at speeds previously considered unusable and yet it retains far better mechanical properties that exceed printed ABS objects, something that the most demanding users have always had to make a compromise on prior to PRO1.
Efficiency and performance
PRO1 offers professionals a solution that enables them to make functional parts without the hassle of tinkering with settings. It is a fast, strong and impact resistant standard material suitable for all desktop FDM printers and has been developed to withstand high stress or strain. Therefore it is a perfect material for the creation of tools, jigs and fixtures.
Innofil3D PRO1 filament has great thermal properties with a vicat softening temperature of 57⁰C. And when PRO1 is annealed, the vicat softening temperature is no less than 150⁰C, which is exceptional!
PRO1 offers major advantages above ABS and PLA;
– SPEED: Reduce your printing time by 30%-80%, (subject to printer and object limitations)
– STRENGTH: Excels overall beyond printed ABS in mechanical property
– VERSATILITY: One filament that can be tuned towards blazing speed and excellent surface finish
– CONSISTENCY: Truly consistent filament, also between colors and batches, it will perform as expected, every time
|Fast printing||Strong settings||Aesthetics setting|
|Print temp||230 °C ± 10 °C||230 °C ± 10 °C||210 °C ± 10 °C|
|Print speed||120 – 150 mm/s||120 – 150 mm/s||≤ 70 mm/s|
|Fill density||≥ 20%||≥ 20% (higher = stronger)||≥ 20%|
|Top/bottom thickness||1.2 mm||1.2 mm (thicker = stronger)||1.2 mm (thicker = stronger)|
|Layer height||≥ 0.1 mm||≈ 0.1 mm||≤ 0.1 (smaller = better)|
|Bed temp||60 °C or non-heated bed with tape/glue||60 °C or non-heated bed with tape/glue||60 °C or non-heated bed with tape/glue|